Introduction:

When considering how much to budget for a patio in Houston, its size is only one factor. A 20x20 paver patio is pretty standard and costs about $2,800, depending on where you live and the materials you select. In Galveston, for example, a 20x20 patio may cost about $18,000, but in Memorial it may soar to about $42,000. So, what goes into the cost?

Let’s take a closer look at the elements that contribute to the cost of a 20x20 patio in Houston, and understand why the contractor you select makes all the difference in the world.

Section 1: Base Material Costs

When it comes to adding a patio to your backyard, you have two basic choices: Cement or pavers for a patio? In Houston, your selections for materials can also impact your final cost. Here’s what to expect when comparing materials for a 400 sq. ft. patio.

Aluminum of the Basic Varieties: If you are going for basic aluminum, you can expect to spend anywhere between $8,200 and $12,800. It withstands the elements and provides a modern style that’s a popular pick for budget-minded homeowners.

Polycarbonate Solid: Polycarbonate solid panels may be the way to go for if you want an extra dose of durability at $14,600-$22,400. This fabric is ideal for light diffusion and provides a lovely translucent appearance that’s ideal for sunny days.

Hurricane-Rated Wood: If you live in a wind-prone part of the country, such as Houston, hurricane-rated wood is a good choice, with a price of about $26,800 to $38,200. This choice of material is resistant to excessive wind and any other suspect weather that might attempt to damage your patio.

Section 2: Houston-Specific Markups

In designing your patio, you’ll also need to take into account regional-specific factors that can drive your cost up even higher. These costs are likely to tack on thousands of dollars to your final bill — especially if you’re in a flood zone or a neighborhood with ultra-strict HOAs.

Flood Zone Surcharge: If a patio in Meyerland is built in a flood zone (and most of them are), additional pilings may be required to meet the current building codes. These pilings can extend down to 18 feet, and will add $9,000 to your total project cost. Flood-preparedness is not optional in some areas of Houston because of the high likelihood of flooding.

Wind Rating Upgrade: For Houston, where storms are a threat, wind rating upgrade is essential. You will pay an extra $6.50 per square foot for Category 4 wind-resistant patio reinforcement. Just add it up, and it becomes an essential investment in zones like River Oaks where homes are so susceptible to extreme weather.

HOA “Character Compliance” Fees: If you live in a swank neighborhood like the Heights or Montrose, your homeowner’s association may have guidelines about what your patio can look like. Fees for design compliance from homeowners associations typically tack on 12 percent. Anticipate approval fees for specialty materials or for specific height requirements, which may add to your budget.

Pier & Beam Attachment If your home is raised off the ground, whether it be brick or block wall with full-pour concrete perimeter, or any style offered on our site, you will definitely need structural attachments added and trained professionals have available for the added cost. You may spend between $4,200 and $8,700 for pier and beam additions.

Section 3: Case Studies of ZIP Codes

Houston neighborhoods vary enough to influence pricing. Here are a few ZIP codes to illustrate how prices vary:

Galveston (77550): A 20x20 patio here will cost around $28,400. Because Galveston is a coastal town, it needs salt-resistant fasteners like any other coastal zone, the risk of flooding practically dictates elevated footings.

Katy (77494): Less expensive though hardly a bargain, Katy, costs hover at $19,200 on a 20x20 patio. Here, higher wind ratings of 110mph and no flood prep help to keep the cost down.

River Oaks (77019): This is the highest end of the spectrum, and the costliest patios in this part of Houston are 20x20 and average about $41,800. Its historic district status in River Oaks means exclusive materials like mahogany will push up the price tag considerably.

Why Choose Mendiola?

When you’re ready to build your patio, you want to select a builder who knows the specific challenges of Houston’s climate. Mendiola provides a stripped-down solution, housing its own smart calculator that takes into account every little detail about your location, from flood zone fees, to how close you are to the beach, HOA costs, and wind rating upgrades. With Mendiola’s one-of-a-kind SmartQuote system, you will receive a pre-calculated quote that includes these additional fees — sparing you from any potential unpleasant surprises once you’ve moved in. The system is designed so you never have to pay for unexpected costs, offering you a fixed price with a 150mph wind warranty for peace of mind. Plus, Mendiola processes all of the permits needed to ensure that your patio project is compliant with all local codes and regulations.

Explore our patio covers installation in Houston process and works.

Conclusion: Let’s Get Your Real 20x20 Quote!

Now that you know what goes into making up the cost of a 20x20 patio in Houston cooking up (or should I say developing a design) a plan to get started is the next step. When it comes to constructing your patio in a serious way, enter to use Mendiola’s ZIP-Specific Calculator now and receive a price quote suited to your area. IF you’re in Galveston, Katy, or River Oaks, we provide accurate pricing so you can keep your project on budget.

Don’t hesitate — visit Mendiola Remodeling, Schedule a Free Consultation or Get a Free Estimate. We’re here to assist at every turn!